Showing all 24 results

Show sidebar

AR MAGLOCK AR-15 (.223 / 5.56) – Gen 1

AR MAGLOCK Kit

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

Note: Only pins in the drop-down list work with this particular locking kit.

AR MAGLOCK AR-10 (.308) – Gen 1

AR MAGLOCK .308 Kit

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

AR MAGLOCK AR-15 (.223 / 5.56) – Gen 2

AR MAGLOCK Gen 2 Kit – Black (anodized) – Fixed Magazine Lock

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

Note: Only pins in the drop-down list work with this particular locking kit.

AR MAGLOCK AR-15 (.223 / 5.56) – Gen 3

AR MAGLOCK Auto Magazine Release.

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

Note: Only pins in the drop-down list work with this particular locking kit.

AR MAGLOCK AR-15 (.223 / 5.56) – Gen 4

AR MAGLOCK Gen 4 Kit – Black (anodized)

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

Note: Only pins in the drop-down list work with this particular locking kit.

AR MAGLOCK AR-10 (.308) – Gen 4 : Narrow receiver width / shorter length shaft

For narrow width .308 receivers
Use this one if you possess Aero Precision M5, DPMS, S&W M&P, Troy, Wilson Combat, CMMG Mk3, LMT, JD Machine, SLR Rifleworks, Windham, Stag Arms, Ruger SR-762 .308, receivers.

If you possess a Palmetto State, Armalite, Remington R-25, LWRC, Anderson, Colt, Juggernaut, SIG, Savage Arms, Vault Armory, Quentin Defense, Mega Arms, purchase the standard length shaft version.

Does not work on Springfield Saint Victor.

AR MAGLOCK AR-10 (.308) – Gen 4 : Standard receiver width shaft

For standard width .308 receivers
If you possess a Palmetto State, Armalite, Remington R-25, LWRC, Anderson, Colt, Juggernaut, SIG, Savage Arms, Vault Armory, Quentin Defense, Mega Arms, purchase this standard length shaft version.

If you possess Aero Precision M5, DPMS, S&W M&P, Troy,  Wilson Combat, CMMG Mk3, and LMT, JD Machine, SLR Rifleworks, Windham, Stag Arms, Ruger SR-762, please use our shorter shaft length Gen 4 AR-10 product.

Does not work on Springfield Saint Victor.

AR MAGLOCK AR-15 – .22 Caliber

AR MAGLOCK Kit

Pin not included in the locking kit purchase. Must be purchased separately in the pull down menu below.

AR MAGLOCK AR-15 (.223 / 5.56) – KingPin

Note: KingPin only works with Gen 2 & Gen 4 AR MAGLOCK locking kits. For Gen 1 and Gen 3 locking kits please use the Hyperswitch pin solution along with the BRS.

AR MAGLOCK Threadlocker Red *For permanent installs

ARMagLock Threadlocker Red – For optionally permanent installs.

Use with ARMagLock drill bit.

AR MAGLOCK Drill Bit *For permanent installs

AR MAGLOCK drill bit for optionally permanent installs.

Use with AR MAGLOCK Threadlocker Red.

AR MAGLOCK Top Load Washer *For top loading

Install in conjunction with ARMagLock and turn your AR-15 in to a top loader.

The washer inhibits the ability of the lock to be depressed when the receivers are separated, allowing for only top loading of the magazine.